PRODUCT
LM Guide
HSR-A:The flange of the LM block is provided with tapped holes to enable simple assembly, making it suitable for use in build-up systems.
HSR-B:The LM blocks can be attached to a table from below. For use with a table in which a through hole cannot be drilled.
HSR-R:The narrowed flange of the LM block is provided with tapped holes, making it convenient for use in build up systems. Can be used to replace the former type NSR-TBA.
HSR-LA:While the cross-sectional dimensions are the same as for type HSR-A, the LM block is longer. The number of effective balls is greater than in type HSR-A.
HSR-LB:While the cross-sectional dimensions are the same as for type HSR-B, the LM block is longer. The number of effective balls is greater than in type HSR-B.
HSR-LR:While the cross-sectional dimensions are the same as for type HSR-R, the LM block is longer. The number of effective balls is greater than in type HSR-R.
Structure and Features
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and end-plates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out (except models HSR 8, 10 and 12). Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse-radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in the four directions while maintaining a constant, low friction coefficient. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable linear motion.
●4-way equal load Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse-radial and lateral directions), enabling the LM Guide to be used in all orientations and in extensive applications.
●High-rigidity type Since balls are arranged in four rows in a well-balanced manner, a large preload can be applied and the rigidity in four directions can easily be increased.
●Self-adjustment capability The self-adjustment capability through front-to-front configuration of 's unique circular grooves (DF set) enables a mounting error to be absorbed even under a preload, thus to achieve highly accurate, smooth linear motion.
